1. Set up the laser and optics system to view prepared holograms. (pp. 2-3, Reference 1)

Skill 1 Movie  (23 KB)

2. Set up a Michelson interferometer and do a vibrational analysis. (pp. 24-5, Reference 1)

3. Use the Digital Laser Power Meter to read the laser intensity level at the laser, reference beam at the film plane, and reflected beam from the object at the film plane and then report the ratio or percent of reflected beam to reference beam.

4. Create a two-beam transmission hologram, reflection hologram, rainbow hologram, or a 360-degree (transmission) hologram.

5. Develop a holographic film plate (and bleach it if necessary) in the CVGS darkroom.